How to monitor network traffic through Datto switches

Configure Datto Switch

  1. Open device web session
  2. Click Port Settings
  3. Select Source and Destination ports by clicking the appropriate box in the left most column of the ports
  4. Click Mirror
  5. Select which port you want the traffic to be mirrored from by choosing it from the Destination ID drop down. Other ports will automatically become sources.
  6. Select Both as the transmission type (default is Rx-Only)
  7. Click OK. The mirror status will display in the Mirroring column on the Port Settings

Ensure you save your configuration once you have verified it is configured correctly